An aqueous cleaner with the powerful performance of a solvent. Removes heavy deposits of grease, oil & dirt. Biodegradable, concentrated, non-abrasive & non-flammable. Use caution on soft metals & painted surfaces.
Perfect for machinery, motors, concrete and non-porous surfaces
Low foaming- perfect for hand-held pressure washers and industrial high pressure parts washers
Save time on most paint projects by cleaning and etching all in one step. For heavily soiled surfaces the original krud kutter should be used as a pre-prep step, to remove excess oil, grease, and dirt. Excess rust should be removed with a wire brush. Krud kutter metal clean and etch is specially formulated to prepare iron, steel, zinc, aluminum, and galvanized surfaces for painting. Removes rust, oil, grease, and dirt. Eliminates paint peeling and other adhesion problems. Do not mix this product with any other chemicals. Directions for use: mix 1 part Krud Kutter Metal clean and etch with 3 parts water in a plastic container. On heavily rusted areas mix with 2 parts water. Apply the premix to metal surface with a paintbrush, spray bottle, sponge or pump up sprayer. Allow the premix to remain on the surface for up to 10 minutes, then thoroughly rinse with water, and wipe dry with rags. Make sure the metal is completely clean and dry, then paint treated surface within 48 hours, to prevent formation of new rust. Contains: phosphoric acid in a water-based solution. Caution: contains phosphoric acid. Severe eye and skin irritant. In case of contact with eyes or skin, flush with water for 15 minutes. If irritation persists, seek medical attention. If swallowed, take large amounts of water. Do not induce vomiting. Get medical attention. Do not mix this product with any other chemicals. Keep out of reach of children. Bland odor. Container size: 1 gallon.
SaniZide PlusTM is a ready-to-use, hospital grade, hard surface disinfectant/deodorizer. Virucidal against HIV-1, HBV, Hepatitis B, MRSA, Vancumycin intermediate resistant, staphyloccus aureus (VISA), VRE, and more. Nonselective odor suppressant chemicall
Manufacturer: The Safetec Incorporated
Brand: The Safetec Incorporated
SaniZide PlusTM is a ready-to-use, hospital grade, hard surface disinfectant/deodorizer. Virucidal against HIV-1, HBV, Hepatitis B, MRSA, Vancumycin intermediate resistant, staphyloccus aureus (VISA), VRE, and more. Nonselective odor suppressant chemically attacks odor-causing microorganisms at source.
Get peace of mind by deodorizing your home with Lysol Brand Concentrate Disinfectant. This time-tested cleaner is proven to eliminate odor-causing bacteria and the flu virus, as well as removing everyday grime and tough messes. One 12-oz. bottle makes 9 gallons of cleaning fluid.
Specially formulated to clean and recondition synthetic brushes and roller covers. This biodegradable, water-based formula is safe, fast and effective on oil, latex and enamal paints, varnish, lacquer, shellac and polyurethane. Contains no harsh fumes like other solvent based brush cleaners. Works on direct-to-metal paints. Do not use on natural bristle brushes. Directions for use: Suspend brush in a container (such as a coffee can) and cover bristles up to the metal ferrule. Soak the brush several hours or overnight until the paint has softened. Agitate periodically to loosen paint. After paint has softened, scrape off paint residue (from heel of brush) using a metal comb or similar tool. Return brush to cleaner and agitate to loosen remaining residue. Lay brush flat on a piece of newspaper and squeeze out excess cleaner. Rinse brush thoroughly with warm running water and shake off excess water. Wrap clean brush in heavy paper and hang bristles down for storage. Contains: A proprietary blend of biodegradable surfactants, detergents and emulsifiers, in a water-based solution. No petroleum solvents, bleach or ammonia. Caution: Eye and skin irritant. In case of contact with eyes or skin, flush with water for 15 minutes. If irritation persists, seek medical attention. If swallowed, take large amounts of water. Do not induce vomiting. Get medical attention. Do not mix this product with any other chemicals. Keep out of reach of children. Mild odor. Container size: 1 gallon.
Jelmar CLR Pro patented calcium, lime, and rust remover for cleaning multiple surfaces including stainless steel, glass, fiberglass, ceramic, porcelain, chrome, cement, stucco, brick and more. Powerful non-toxic formulation effective on hardest of lime and calcium buildup. Great for cleaning coffee pots, coffee makers, commercial washing machines, dishwashers, vinyl siding, sinks, toilets, humidifiers and filters, hard water stains; for use with pressure washers. Safe for plumbing; safe for use on light-colored grout; septic safe; biodegradable; not harmful to nearby grass, shrubs, or vegetation. EPA's DfE formula for safer chemistry; USDA Certified Biobased Product, 80 percent. Multi-Use in lodging, manufacturing, entertainment, government and hospitality areas. 1 gallon bottle.