ACL Staticide general purpose topical anti-stat. A proprietary water-based formulation consisting of several quaternary compounds. An inexpensive, easy-to-use topical antistatic solution, is a highly-effective method for long-term static control. It is widely used in a broad range of industries, as well as in the office. Easily applied on walls, ceilings, floors, carpets, fixtures, work surfaces, tools and equipment, conveyor belts, clothing and other materials. On a hard surface, one gallon of Staticide will cover several thousand square feet and last from weeks to months, depending on the application. Light duty solution for low friction surfaces and clear high gloss materials. Used for all work surfaces, trays, tote bags, PC boards, plastics, dip tubes, components, storage bins, carriers, packaging, film and hard floors. Does not last as long as Regular staticide. Non-toxic, non-flammable, safe to use. Non-staining, completely biodegradable. Effective on carpeting and tile floors. Available in ready-to-use or concentrated form. Effective in PC board solder fault reduction programs. Meets MIL-B-81705 and NFPA-56A electrostatic decay criteria. Meets the requirements for topical antistats as listed in Military Handbook DOD-HDBK-263. Proven effective in relative humidities below 15 percent. Used in highly sensitive electronic and EDP operations. Proven effective in eliminating EDP field service problems. Specified by many industrial users. Effective in all office environments where electronic equipment is located. Approximate cloud point: 30 degrees F. Approximate solidification point: 20 degrees F. Shelf life: indefinite. Temperature stability: withstands up to 30 minutes at 250 degrees F. Very slight amber/clear color. 1 gallon bottle.